global navigation
  • about TERADA MOKEI
  • Par Avion


  • Japanese
  • English

Terada-Mokei was established with a view to exploring the potential for modeling, which is created by scaling things down and giving them detail, through models. This reflects our belief that when real items are replaced with models, the latter have an essence of reality, stuffed with dreams, and the potential to become more vibrant -- better word in my opinion than their originals. We also consider it important to enjoy the process of assembling models.
Terada-Mokei also hopes to convey the fun of assembling models and imagining the same.


About Models

"Replicas" and "models" are different.

Replicas and models are often confused for one another.
Replicas are substitutes that you accept when your desire to have the real thing cannot be fulfilled. That is to say they are imitations or reproductions. For example, a replica of the mask of Tutankhamen or Michael Jackson's jacket. At Terada-Mokei though, we don't think of "models" as replacements, but rather a product that represents, in a positive manner, values or points-of-view different from the actual object. For example, models of test airplanes for wind tunnel experiments or molecular models of the amino acid sequence, the model itself exists in that representation and reason for the model. These are what are defined as "models".


Models come in a variety of scales. For example, globes are 1/300,000,000 in scale.
Luxury cruise ships come in 1/350 or 1/700th scale. Architectural models and drawings are typically 1/50 or 1/100 in scale. On the other hand, some models are much larger than their originals. Cellular sequence models and models of small insects can be 10 times or 100 times larger than the actual object. There are full-scale models as well. School science room skeletal models are usually actual size.
In another example, the railroad model "N scale" is 1/148 to 1/160 scale in size. The ratios might seem odd but, this is the scale inversely configured to fit the width of the tracks set at 9mm. And then there's plastic model tanks, which are mainstreamed at 1/35th scale. The scale in this case was decided upon so that two "C" sized batteries would fit into the body of the tank. In addition, models in the 1/12th or 1/48th range adhere to the Imperial Units rule of feet and inches. 1/12 represents 1-foot reduced to 1-inch, while 1/48 represents 1-foot reduced to 1/4th an inch (or a quarter inch). As the Imperial Units rules are originally based on a duodecimal system, the denominator is a multiple of 12.
However, there are models which have no set scale--like toy cars. For ease of product handling, box sizes need to be standardized. Therefore since both small sports cars and large fire engines have to fit in the same sized product box, their sizes are standardized as well. And since all the toy cars vary in scale, they aren't really scale models.
That said, model paper airplanes and similar objects are, to an extent, converged into one size, so that they are able to fly. Understanding the Earth's gravity, the properties of the paper, and the relationship of air density, we can deduce what that size should be. Though it is a non-scaled item nor is the airplane based on the real thing, because the scale is based on rationale, we called it a scale model.
There is a reason behind setting scale, therefore upon perceiving said scale, we can understand the goal and intended purpose of the model's creation. So conversely when you need to decide which scale to use, you need to be careful. Furthermore, depending on what is it you are trying to represent or what message you are trying to express to others, you have to make a decision on what kind of materials and technique you will employ.
Scale conversions are a little confusing perhaps.
For example, when one converts a 1/100 scale model to full size, it translates into a volume of [1/100^3, or] one millionth (1/1000000). A 1/ 100 scale model apparently feels a million times smaller than the real thing. The difference in the numerical notation is perceived threefold. I believe the difficulty/problem arises in having to use one-dimensional notation to deal with a three-dimensional object.


I used to think that the ideal scale model would be one that represents the real deal in shape and element in every way, whether you looked at it with the naked eye, a magnifying glass or a microscope. Well if shrinking lasers existed, they would be the solution of all the problems of scaling things. But they don't exist, so all we can do is try to follow in the footsteps of the peerless skills of those like Swiss precision watchmakers. That said, creating the perfect model that grabs people's attention is not about creating perfection. Constructing the details and controlling density of a model is crucial. Any way you work it, appreciation comes from a visual context, so detailing things the human eye cannot or will not pick up is pointless. Rather those models which are low on elements and leave room for the imagination give birth to 'reality'. The 1/1 scale human eye can appreciate models. This is where scaling mediates, by using your imagination to compensate between you and the difference in model scaling. I think that's the joy in appreciating a model. In my opinion, deciding on how to construct that compensation -- that is to say, figuring out the details -- is the fun in creating a model.


As a method for resolving the problem of detailing, we can use a form of distortion. I believe there are two methods of going about this.

・The Distortion of Color
About the time I had gotten started in architecture, a senior colleague of mine taught me: "Color tends to look lighter when applied to a larger area." That sounded reasonable; compared to smaller area color samples, large walls appeared lighter and brighter. My thought on the subject is that generally when viewing samples, we pick them up and hold them at range of 10cm or so, while large walls are viewed at a distance of several meters. It won't fit into our field of view otherwise. So we step back. Thus color looks lighter from a distance.
I think that's because between the human eye and the object being viewed, there are layers of atmosphere and the minute particles in the air that block our vision, rendering the color lighter. Similarly in my opinion, in Japanese- style paintings, backgrounds are painted with a lighter color ink to create a blur which emphasizes a sense of distance, a technique called "atmospheric perspective".
Viewing a small model is like viewing the real thing from a distance, therefore thinning the color of the model by a degree of viewing the real object through air density, increases the realism of the object. For example, if you view a 1/24 scale model from a distance of 1 meter, that is the same as viewing the real object from 24 meters back. With 24 times the atmospheric particles obstructing view, if you increase the luminosity and decrease in the saturation, the feeling of the work will be just right. It's quite a pleasing effect. Moreover, as it is your vision that is blurred by particles in the air, color is not the only thing that appears blurs. Shapes and contours also blur. So by not defining the model so rigidly, it is possible to create a more realistic model.



The catalyst for producing this product was the construction of architectural models at the office on a daily basis. It was a design office, so that was normal, but I came to realize that to improve the visual aspect of architectural models, people, furniture, trees lining the streets and so on, known as "architectural model accessories", were as important as the architecture itself. However, it often took me all night to construct a model. I used to run out of steam mentally and physically when having to make the key "architectural model accessories" at the break of dawn. Moreover, I hesitated to ask my red-eyed staff to "line some bicycles along here", as that would have made me sound like a drill sergeant.
Subsequently, I thought if such accessories could be mass-produced in advance, it might help in getting a little more sleep.
If I could make people happy through these "architectural model accessories," without constructing actual architectural structures, I thought it would be my great pleasure.
The clue to commercializing them came by way of plastic models.
I love plastic models. Even these days, after I'm finished with work, I enjoy the steady process of assembling them. (At the office, I work on paper models, then return home to refresh by assembling plastic models...)
The interesting thing about plastic models is that there are two degrees of completion.
For customers who buy plastic models at retail stores, the model is "unassembled", but for makers, who line them along the shelves of the same retails stores, they are assembled "finished products." More so than the completion of the parts, a combination of the strengths of a striking box-photo and the assembly instruction (what were called "blueprints" when I was boy) graphics significantly impacts the completion of the finished product. If there is a feeling of incompleteness in any of these, motivation to assemble the model will be low. With top- class manufacturers, that sense of completion is high, which in turn greatly affects the customer excitement even before assembly.
Our "ARCHITECTURAL MODEL ACCESSORIES SERIES " are like plastic models in that you have to assemble them, so the design and layout of each part was painstakingly created so that the excitement of it is constant throughout the process of assembling them. Parts that can be properly assembled, exciting shapes that encourage assembly, and the precision processing of manufacturing, these three points are repeatedly recalibrated into prototypes until they are correct.
The question was how should I distort the 1/100 scale world to bring it to life. If you look at the 1/100 scale human figure used in the product logo, it is quite different from the figure of a real human. The figure is deliberately distorted so it will be able to represent the world in a 1/ 100 scale. So it becomes the rule to distort all the items in the 1/100 scale world in the same fashion. With that the representation of the world in 1/100 scale is complete.
Moreover, the instructions on the back are quite painstakingly written out. Within the space of a postcard, our goal is to create a little fun by having customers imagine what the lives of the little 1/100 scale humans are like. With that in mind, I took the time to design not just the product but the assembly instructions as well.

Why 1/100 Scale?
The 1/100 scale is the most popular scale when it comes to architectural building models.
From models of houses and apartments, to public facilities and shopping centers, all these different sized buildings are possible to represent. In addition, since interiors, furniture and similar objects can also be represented on a generic scale, accessory sets have become 1/ 100 in size. Also, I think the 1/100 scale makes it easy to create various abstract and distorted items. However the 1/200 and 1/300 scales are too small making for very little room to work within. As for the 1/50 and 1/30 scales, I'm concerned about the texture and the detail of the shapes. I think that 1/100 is the perfect scale for creating, as it creates just enough difference in the objects, such as between human poses and gestures, a folding chair and a wooden chair, and a Shiba Inu and a Golden Retriever.

Why isn't there any architecture involved?
When I first began my architectural courses, the first thing that was said to my classmates and me was "Architecture should bring joy to people, designing such architecture in the future will be your duty." An architect's calling is to make people happy through architecture.
That's a lot of pressure. Taking those words to heart, I set forth to build models with the intention of presenting them to the clients, yet when I showed clients the models the first thing they would say was something to the effect of "Oh, you've recreated the whole family!" or "That's our dog in the garden!" In essence, it wasn't the architecture they were thrilled to see but the accessories. That brought out the little devil in me, and I took pleasure in posing the figures I would show the clients. Through the shapes and poses of the accessory figures, I believe that the architectural goal of bringing happiness fulfilled. Thus, the accessory kits are not architecture. So even without architecture, if people can be happy with the accessories, then I am happy as an architect. Architecture is the foundation of Terada-Mokei, which is designed at Terada Design.

It's okay not to assemble it
I designed the accessory sets as kits you can assemble.
As the accessory kits are assembly kits, I designed them to be fun for you to do so, however I would be just as pleased if you are so inclined to just enjoy envisioning their unassembled potential as well.
As with assembling plastic models, the most exciting part is looking over the "blueprints" and imagining their potential. If it makes you happy just to hold the package, that would make me happy as well.

About the logo

The character in the product logo is a 1/100 scale person who always appears in 1/100 ARCHITECTURAL MODEL ACCESSORIES SERIES. I named him "Genki-kun." "Genki- kun" does not "Mr. Energy" but "Mr. Standard."
There are various units of length. In ancient times, cubits in the Egyptian era, and feet, inches, shaku and suns were also units of length. Although they have been used until very recently (or even still), a metric system has been established with international unification in mind. So the "standard meter" exists to strictly define the length of 1 meter. The origin of the name "Genki-kun" comes from his representation of the global standard for 1/100 ARCHITECTURAL MODEL ACCESSORIES SERIES. He defines the global view at 1/100.
Moreover, Terada-Mokei hopes to create something serving as a "standard" for models and scales in future. So, I had "Genki-kun" appear in the logo. Even though the logo size may change, "Genki-kun" remains at 1/100 as the "standard". When the logo size changes, the design follows suit.
"Genki-kun" has a family. They are his wife "Mrs. Genki", his son "Genki Junior" and daughter "Genki-chan" and his pet "Genki Doggy", who will all appear eventually.


Naoki Terada Architect, designer, modeler, culinary specialist
1967 Born
1989 Graduated from Architectural Department, School of Science & Technology, Meiji University
1994 Completed the diploma course of the Architectural Association School of Architecture (AA school) in the UK
2003 Established Terada Design first-class architect office
2011 Established TERADA MOKEI